Numéro |
EPJ Web Conf.
Volume 153, 2017
ICRS-13 & RPSD-2016, 13th International Conference on Radiation Shielding & 19th Topical Meeting of the Radiation Protection and Shielding Division of the American Nuclear Society - 2016
|
|
---|---|---|
Numéro d'article | 04008 | |
Nombre de pages | 9 | |
Section | 4. Medical Facilities, Radiotherapy & Medical Applications, Space Dosimetry & Shielding | |
DOI | https://doi.org/10.1051/epjconf/201715304008 | |
Publié en ligne | 25 septembre 2017 |
https://doi.org/10.1051/epjconf/201715304008
Development of An Epi-thermal Neutron Field for Fundamental Researches for BNCT with A DT Neutron Source
1 Graduate School of Engineering Osaka University, Yamadaoka 2-1, Suita, Osaka, Japan
2 City government of Kobe, Kanou 6-5-1, Tyuoku, Kobe, Hyogo, Japan
3 Department of engineering Fukui University of Technology, Gakuen 3-6-1, Fukui, Fukui, Japan
* Corresponding author: y-osawa@qr.see.eng.osaka-u.ac.jp
Published online: 25 September 2017
Boron Neutron Capture Therapy (BNCT) is known to be a new promising cancer therapy suppressing influence against normal cells. In Japan, Accelerator Based Neutron Sources (ABNS) are being developed for BNCT. For the spread of ABNS based BNCT, we should characterize the neutron field beforehand. For this purpose, we have been developing a low-energy neutron spectrometer based on 3He position sensitive proportional counter. In this study, a new intense epi-thermal neutron field was developed with a DT neutron source for verification of validity of the spectrometer. After the development, the neutron field characteristics were experimentally evaluated by using activation foils. As a result, we confirmed that an epi-thermal neutron field was successfully developed suppressing fast neutrons substantially. Thereafter, the neutron spectrometer was verified experimentally. In the verification, although a measured detection depth distribution agreed well with the calculated distribution by MCNP, the unfolded spectrum was significantly different from the calculated neutron spectrum due to contribution of the side neutron incidence. Therefore, we designed a new neutron collimator consisting of a polyethylene pre-collimator and boron carbide neutron absorber and confirmed numerically that it could suppress the side incident neutrons and shape the neutron flux to be like a pencil beam.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.