| Numéro |
EPJ Web of Conferences
Volume 56, 2013
International Workshop NUCPERF 2012: Long-Term Performance of Cementitious Barriers and Reinforced Concrete in Nuclear Power Plant and Radioactive Waste Storage and Disposal (RILEM Event TC 226-CNM and EFC Event 351)
|
|
|---|---|---|
| Numéro d'article | 06003 | |
| Nombre de pages | 9 | |
| Section | Session 6: Metallic Corrosion | |
| DOI | https://doi.org/10.1051/epjconf/20135606003 | |
| Publié en ligne | 11 juillet 2013 | |
https://doi.org/10.1051/epjconf/20135606003
The anaerobic corrosion of carbon steel in alkaline media – Phase 2 results
1 AMEC, Building 150, Harwell Oxford, Didcot, Oxfordshire OX11 0QB United Kingdom
2 SCK-CEN, Boeretang 200, B-2400 Mol Belgium
a e-mail: nick.smart@amec.com
In the Belgian Supercontainer concept a carbon steel overpack will surround high-level waste and spent fuel containers and be encased in a cementitious buffer material. A programme of research was carried out to investigate and measure the rate of anaerobic corrosion of carbon steel in an artificial alkaline porewater that simulates the aqueous phase in the cementitious buffer material. The corrosion rates were measured by monitoring hydrogen evolution using a manometric gas cell technique and by applying electrochemical methods. Phase 2 of the programme has repeated and extended previous Phase 1 measurements of the effects of radiation, temperature and chloride concentration of the anaerobic corrosion rate. This paper provides an update on the results from Phase 2 of the programme. The results confirm previous conclusions that the long-term corrosion rate of carbon steel in alkaline simulated porewater is determined by the formation of a thin barrier layer and a thicker outer layer composed of magnetite. Anaerobic corrosion of steel in cement requires an external supply of water.
© amec, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.